Blog categories



FP 10000Q

The FP 10000Q is the flagship four-channel model in the FP+ Series. At the core of the FP 10000Q’s performance is a breakthrough advance in Lab.gruppen’s patented Class TD® output stage, an amplifier topology that approaches the exceptional efficiency of Class D while retaining the sonic purity of proven Class B designs. 

More details

10 items in stock

  • Currently 1.00/5

Rating: 1.0/5 (1 vote cast)


  • Very high power and channel density – The four-channel FP10000Q delivers a total of 10000 W (4 x 2500 W @ 2 ohms) in only 2U 
  • Four-channel flexibility – Adjacent channels bridgeable for 2- or 3-channel operation
  • Lab.gruppen sound quality – impeccable sonic performance standards with durability and greater efficiency
  • NomadLink® network ready – Monitoring and control of key functions accessible via the intuitive DeviceControl software 
  • Patented Class TD amplifier topology – Road-proven output stage delivers Class B audio quality with Class D efficiency 
  • Regulated Switch Mode Power Supply (R.SMPS) – Output power remains constant even with significant drops in the mains voltage
  • Efficient cooling system - Unique, lightweight Intercoller copper cooling system dissipates more heat to allow extended peak output
  • Adjustable parameters - Selectable Gain, scalable Voltage Peak Limiter (VPL), and bridge-mode operation allow custom configuration for any application
  • Comprehensive protection and warning – Excessive output current, DC, high temperature, very high frequency (VHF), short circuit, open load, mains fuse protection, and soft start
  • XLR input connectors
  • Heavy-duty binding post or Speakon output connectors


Number of channels4
Peak total output all channels driven10000 W
Peak output voltage per channel150 V
Max output current per channel50 A peak
Max output power all channels driven
16 ohms660 W
8 ohms1300 W
4 ohms2100 W
2 ohms2500 W
Max output power bridged
16 ohms2600 W
8 ohms4200 W
4 ohms5000 W
2 ohmsNot recommended 1
THD 20 Hz - 20 kHz at 1W<0.1%
THD at 1 kHz and 1 dB below clipping<0.05%
Signal to Noise Ratio>112 dBA
Channel separation (Crosstalk) at 1 kHz>70 dB
Frequency response (1 W into 8 ohms) +0/-3 dB6.8 Hz - 34 kHz
Output impedance @ 100 Hz32 mOhm
Gain, Sensitivity and Limiters
VPL, selectable per ch150, 121, 101, 83, 70, 56, 47, 38 V
VPL, when bridged 2300, 242, 202, 166, 140, 112, 94, 76 V
Voltage Peak Limiter mode (per ch.)Hard / Soft
Amplifier gain selectable (all channels) – rear-panel switches 223, 26, 29, 32, 35, 38, 41, 44 dB
Default gain35 dB
Level adjustment (per channel)Front-panel potentiometer, 31 position detented from -inf to
Connectors and Buttons
Output connectors (per ch.)Neutrik speakON
Input connectors (per ch.)3-pin XLR, electronically balanced
Output bridge modeA+B - Ch. A is signal input source. A+B, C+D - Ch.’s A and C are input source
NomadLink networkOn board, 2 x RJ45 connectors IN and OUT
Intelligent fans (on/off)Yes, depending on presence of output signal
Power on/off and Remote enable on/offIndividual switches on front-panel
CoolingDual fan, front to rear airflow, no filter required, temperature controlled speed
Front-panel user interface
CommonNomadLink Network; Power Average Limiter (PAL)4; Power on
Per channelSignal present / High-impedance; -10 dB and -4 dB output signal;Voltage Peak Limiter (VPL); Current Peak Limiter (CPL): Very High Frequency (VHF); High temperature; Fault; Mute
Operating voltage, 230 V / 115 V nominal 3130-265 V / 65 -135 V
Minimum power-up voltage, 230 V / 115 V171 V / 85 V
Power Average Limiter (PAL) 4Yes
Soft-start / Inrush Current DrawYes / max. 5 A
Mains connector230 V CE: 16 A, CEE7; 115 V ETL: 30 A Twist lock
DimensionsW: 483 mm (19”), H: 88 mm (2 U), D: 396 mm (15.6”)
Weight12 kg (26.4 lbs)
FinishBlack painted steel chassis with black painted steel / aluminum front
ApprovalsCE, ANSI/UL 60065 (ETL), CSA C22.2 NO. 60065, FCC

No customer comments for the moment.

Only registered users can post a new comment.