Estd.1958

Categories

BRANDS

Blog categories

Catalog

Search

RMX 5050

QSC's RMX 5050 power amplifier represents the state-of-the-art in professional quality performance at an affordable price. The RMX 5050 is optimized to deliver high levels of sustained power, extraordinary audio performance and road-proven reliability.
 

More details

Availability: This product is no longer in stock


Notify me when available

  • Currently 0.00/5

Rating: 0.0/5 (0 votes cast)

30 other products in the same category:

FEATURES

The new flagship of the RMX line, the RMX 5050 provides extremely high power and represents tremendous value
The RMX 5050 provides advanced thermal performance, delivering higher continuous power in 2-ohms stereo or 4-ohms bridged applications
Dual mono, high current power supply for increased reliability and performance
3RU chassis only 16" deep
Professional quality performance - incorporates road-proven QSC designs
High-current toroidal transformers for greater two-ohm power and low noise
Independent user-defeatable clip limiters reduce distortion
Selectable low-frequency filters (30 Hz or 50 Hz) protect speakers and increase headroom
Balanced 1/4" (6.3 mm) TRS, XLR, and barrier strip inputs for maximum flexibility
Binding post and Neutrik Speakon outputs
Front mounted gain controls for easy access
Signal and Clip LED indicators to monitor performance
3-year warranty. An optional 3-year extended service contract is available. Ask your dealer for details

SPECIFICATIONS


STEREO MODE, Both Channels Driven
8 ohms 
  FTC 20 Hz - 20 kHz, 0.1% THD
  EIA 1 kHz, 0.1% THD

1050 W
1100 W
4 ohms
  FTC 20 Hz - 20 kHz, 0.1% THD
  EIA 1 kHz, 0.1% THD

1600 W
1800 W
2 ohms 
  FTC 20 Hz-20 kHz 0.1% THD
  EIA 1 kHz 1% THD

2000 W
2500 W
 BRIDGE-MONO MODE
8 ohms 
  FTC 20 Hz-20 kHz 0.1% THD
  EIA 1 kHz 0.1% THD

3200 W
3600 W
4 ohms 
   EIA 1 kHz 1% THD

5000 W
Distortion (SMPTE-IM)Less than 0.02%
Distortion (Typical)
20 Hz - 20 kHz: 10 dB below rated power
1 kHz and below: full rated power

Less than 0.02%
Less than 0.02%
Frequency Response

20 Hz - 20 kHz, 8 ohms, LF filter bypassed, +0/-1 dB
5 Hz - 50 kHz, 8 ohms, LF filter bypassed, +0/-3 dB
Damping FactorGreater than 250 @ 8 ohm
Noise (unweighted)100 dB below rated output (20 Hz - 20 kHz, 8 ohm load)
Input Sensitivity1.42 Vrms for 1050 watts into 8 ohms
Voltage Gain64x (36 dB) for 8 ohm load
Input Impedance20k ohm balanced, 10k ohm unbalanced
Controls Front:
Controls Rear:

AC power switch, Ch. 1 and Ch. 2 gain control
10-pole DIP switch featuring LF filter on/off, LF filter 30/50 Hz, Clip Limiter on/off controls for each channel and switches for selecting Stereo, Parallel, or Bridge mode. Push-button circuit breaker for each channel.
Indicators

Power-On: Green LED, Protect: Red LED
Signal -30dB: Yellow LED, Clip: Red LED
Connectors Input:
Connectors Output:
XLR female, TRS (1/4"), and barrier-strip screw terminals, each channel
Binding posts and Speakon® outputs (Ch. 1 Speakon wired for biamp)
CoolingContinuously variable-speed fan, rear-to-front air flow
Amplifier Protection

Short circuit, open circuit, thermal, ultrasonic, and RF protection. Stable into reactive or mismatched loads
Load ProtectionOn/off muting, DC fault output crowbar
Power Requirements100, 120 or 240 Volts AC (┬▒10%) 50-60 Hz (factory configured)
120V models require 20 Amp service and are supplied with a NEMA 5-20 plug on the cordset.
Dimensions19" (48.3 cm) wide, 5.25" (13.3 cm) tall, 15.9" (40.39 cm) overall depth
Weight75 lbs (34.02 kg) net, 87 lbs (39.46 kg) shipping

No customer comments for the moment.

Only registered users can post a new comment.

HELP CENTER
CONTACT US

 

 

 

 

Search